How to make furnace oil from tyres?
Waste tyre
With the improvement of living standards, the number of cars is increasing. On the one hand, he can bring great convenience to our travel; on the other hand, the waste tires that were replaced from the cars have caused great harm to our living environment.
How to convert these black pollutions reasonably and not re-caused pollution to our living environment is a matter worthy of study and discussion.
DoingGroup's waste tyre pyrolysis plant
DoingGroup, standing in the forefront of the development of the industry, first proposed this idea how to make furnace oil from tyres? And developed a waste tyre pyrolysis plant.
So how to make furnace oil from tyres? It mainly uses high-temperature pyrolysis chemical reaction, in the high temperature, closed, oxygen-free environment, so that waste plastics at high temperatures, the process of cracking out fuel oil, carbon black, steel wire,and combustible gases. Of course, the conversion of waste tyre into fuel oil is not just so simple . Its specific process is as follows:
Waste tyre pyrolysis plant working process
1. The waste tyre is sent to the reaction vessel through a auto-feeder, and is heated by using coal, wood, oil,steel wire, natural gas, and so on.
2. The temperature rises to about 200 degrees and begins to crack heavy oil and gas.
3. The heavy oil and gas oil is initially filtered by the catalyst chamber, and after deceleration, it enters the condensing system and is liquefied into heavy oil and falls into the oil tank.
4. Decolorization and deodorization of the obtained heavy oil, the final result is fuel.
5. The carbon black produced during the combustion process will eventually pass through the underground sealing channel and be automatically discharged outside the furnace. Due to better sealing performance, secondary pollution to the environment is avoided.
Through this process and based on different wastes materials, their oil output is also different:
All kinds of raw waste materials
These final products have a very wide range of uses in life. Their specific uses are as follows:
1. Fuel oil:
Fuel oil application
1). It is sold as fuel to cement plants, glass factories, ceramic factories, power plants, steel mills, boiler plants, etc.
2).For heavy oil generators.
3)The Dongying Group's distillation equipment and decolorization and deodorization equipment are used to deeply process fuel oil into diesel oil. Tyre diesel can be used for trucks, tractors, etc.
2. Carbon black:
Carbon black application
1).Made of spherical carbon black, carbon black briquettes for heating and burning.
2).Ground to N220, N330, N550 or N6660 for tire manufacturing industry.
3).Processed into masterbatch, sold to the plastics industry.
3.Steek wire
1)Recycle to furnace, heat reactor, save your coal/wood/fuel oil/natural gas.
2)Store remaining exhaust gas for heating other furnaces.
How to make furnace oil from tyres? There are already very mature technologies and there are national policy support. You only need to spend less investment, you can bring huge profits later, is your best choice for investment!
DoingGroup's waste tyre pyrolysis plant
So how to make furnace oil from tyres? It mainly uses high-temperature pyrolysis chemical reaction, in the high temperature, closed, oxygen-free environment, so that waste plastics at high temperatures, the process of cracking out fuel oil, carbon black, steel wire,and combustible gases. Of course, the conversion of waste tyre into fuel oil is not just so simple . Its specific process is as follows:
Waste tyre pyrolysis plant working process
1. The waste tyre is sent to the reaction vessel through a auto-feeder, and is heated by using coal, wood, oil,steel wire, natural gas, and so on.
2. The temperature rises to about 200 degrees and begins to crack heavy oil and gas.
3. The heavy oil and gas oil is initially filtered by the catalyst chamber, and after deceleration, it enters the condensing system and is liquefied into heavy oil and falls into the oil tank.
4. Decolorization and deodorization of the obtained heavy oil, the final result is fuel.
5. The carbon black produced during the combustion process will eventually pass through the underground sealing channel and be automatically discharged outside the furnace. Due to better sealing performance, secondary pollution to the environment is avoided.
Through this process and based on different wastes materials, their oil output is also different:
All kinds of raw waste materials
| PE | 95% |
| PP | 90% |
| PS | 90% |
| ABS | 40% |
| Leftovers of paper | Wet 15-20%,dry 60% |
| House garbage | 35-50% |
| Plastic cable | 80% |
| Plastic bag | 50% |
| Submarine cable | 75% |
| Rubber cable | 35% |
| Sole | 30% |
| Big tires | 45-50% |
| Small tires | 35-40% |
| PVC | Not suitable |
| PET | Not suitable |
These final products have a very wide range of uses in life. Their specific uses are as follows:
1. Fuel oil:
Fuel oil application
2).For heavy oil generators.
3)The Dongying Group's distillation equipment and decolorization and deodorization equipment are used to deeply process fuel oil into diesel oil. Tyre diesel can be used for trucks, tractors, etc.
2. Carbon black:
Carbon black application
1).Made of spherical carbon black, carbon black briquettes for heating and burning.
2).Ground to N220, N330, N550 or N6660 for tire manufacturing industry.
3).Processed into masterbatch, sold to the plastics industry.
3.Steek wire
1). Sell directly to the steel plant.
2). Provide a higher profit wire treatment program, so that the price of steel wire up to 460 US dollars per ton.
4. Combustible gas1)Recycle to furnace, heat reactor, save your coal/wood/fuel oil/natural gas.
2)Store remaining exhaust gas for heating other furnaces.
How to make furnace oil from tyres? There are already very mature technologies and there are national policy support. You only need to spend less investment, you can bring huge profits later, is your best choice for investment!
