Converting used motor oil to diesel fuel
At present, consumption of crude oil is increasing along with number of vehicle is growing continually, and a large amount of used motor oil has been produced. On the other hand, crude oil price continues to rise and oil resources is declining gradually. So an alternative energy of oil resource is needed urgently.
Converting used motor oil to diesel fuel from Doing group is not only to produce the high-quality gasoline and diesel fuel, but also can dispose used motor oil.
Converting used motor oil to diesel fuel
Speaking of converting used motor oil to diesel fuel, the most important thing we must pay attention to is the oil yield. Our converting used motor oil to diesel fuel can make the oil yield reach as high as 85%-90%. But there are still many other factors influencing the oil yield. Firstly, different kinds of raw materials have different oil yield. Secondly, the water content will also influence the oil yield. For example, the raw material ( like used motor oil) recovery is more than 90% when the water percentage is less than 5%. What’s more, different operation systems have different oil yield as well.
Distilling used motor oil to diesel fuel processing used motor oil to diesel
Firstly, put used motor oil enters the raw material precipitation tank through the oil pipe; then adds the degumming catalyst; after finishing this step, we can inject air into the precipitation tank for about 30 minutes through the air compressor; by this step, the degumming pyrolysis will be fully mixed with raw material. Next let the liquid subside for 3 hours.
Secondly, after 3 hours, the sediment of the raw material precipitation tank will be discharged, and then the crude oil, which has finished the precipitation, will be pulled into distillation tower through the oil pipe.
Converting used motor oil to diesel fuel 3 D picture
Thirdly, start to distill the motor oil with high temperature, and use fuel oil to heat distillation reactor; at this time, the raw material will be heated circularly between the oil heating furnace and distillation reactor; when it reaches the related temperature, the oil gas of each reactor will enter the heat exchange system and condenser system in order through the distillation tower. The final products including gasoline and diesel will be stored into oil tank respectively.
After processed by the converting used motor oil to diesel fuel, the various kinds of used motor oil can be turned into diesel or gasoline, which makes the pyrolysis oil price higher in the market and have wider applications. It is the best choice for the used motor oil buyers to further process the oil.
