How to turn plastic into fuel at home?

• 2017-06-20 11:34
• FAQ of Waste to diesel
• Chat Online

Plastic fuel is a Plastics to Fuel depolymeriser where certain plastics are heated in a oxygen free environment and then distilled to produce over 100 litres of Diesel/Petrol type fuel from plastics like Poly Prolylene (PP).
  1.90% Plastic to Fuel conversion rate: 1KG Poly Propylene =900ml Diesel/Petrol type combination.

  2.  It takes approximately 1 1/2 hours to get the system to 300 Degrees Celciuss.

   3. From 300 to 350 degrees you get a multifuel, from temperatures over 350 degrees the pertrol/nafta is split off and a light diesel gas oil is left in the primary condenser.

    4.The system can take condensed pure plastic loads of up to 100kg, experience has shown that when you insert bags and pieces of plastic you get a lower KG density load in the system. This will result in you running the system for 3 to 4 times per day to get over 100 litres of fuel per day.

    5.The PLASTIFUEL 100 produce more than 100 litres per day.

    6.Use Gas, Wood, Charcoal and excess gas from the Plastifuel for heating the system.

   7. No power equired.

    8.The diesel is basically a Light Diesel Gas Oil and the Petrol is a Petrol/Nafta type fuel.

    9.The fuel is not up to spec and it is impossible to get standard grade fuel with this entry level depolymeriser.

    We suggest to use to  convert waste plastic to diesel fuel plant to convert plastics to these fuels foe own use in older basic engines or as a burner fuel.

How to turn palstic into fuel at home?
 Feeding the plastic oil into the reactor by oil pump, and fire the fuel in the chamber. The oil gas will go through the fractionating tower and then goes into the oil condenser to be liquefied into diesel  , then transport the diesel to the pickling tank and alkaline tank to improve the quality of the diesel oil. Meanwhile, the vacuum generator making the whole system in vacuum environment to ensure the process is safe.  The syngas will be recycled to heat the reactor after desulfuration and purification by the hydroseal, which also can prevent the fire go back